Technique Print Samples - page 66

5. A drop-down list appears listing all of the automated switches on the selected
channel. Select the switch you want to add to the
Group
.
6. To change the mode of the switch from
Master Slave
click in the
Mode
column
next to the switch you want to edit.
7. A drop-down list appears listing the four available modes. Select the required mode
in the list.
8. Continue adding switches to the
Group
in a similar fashion.
9. To create another
Switch Group
select a different
Group Number
in the
drop-down list in the upper-right of the
Switch Groups
window. The switches
assigned to the first
Group
will disappear, only the
Switches
in the
Group
selected
will be displayed. Create the new
Group
as described above.
Selecting Switches in a Switch Group
1. In order to edit the assignment of a switch to a
Switch Group
the entry in the
Switch Group List
must be selected.
2. Select the entry by clicking into the
SEL
column beside the channel name.
3. The selection is indicated by a red checkmark in the
SEL
column.
4. Deselecting an entry is done in a similar fashion. The checkmark will be cleared
when the entry is deselected.
Deleting Switches from a Switch Group
1. In order to delete switches from a
Switch Group
the entry for the switch must be
selected (see above).
2. When you have selected all the entries you want to delete click
Delete
.
3. A dialogue will appear asking for confirmation. Click
Yes
.
4. All switches with a red checkmark in the
SEL
column will be deleted.
5. It is important to note that if
Switch Group
actions are recorded to a
Mix
then the
Group
must be maintained in order to replay those actions from the
Mix
.
64
Supertrue 4 User Guide
1...,56,57,58,59,60,61,62,63,64,65 67,68,69,70,71,72,73,74,75,76,...166
Powered by FlippingBook