Technique Print Samples - page 148

Compressor
IN
Switches the device
On
/
Off
effectively providing a
Bypass
facility.
LINK
When pressed, this
Links
the current channel to its
Link
partner.
Odd
numbered channels link to the channel to the right,
Even
numbered
channels link to the channel to the left. No other
Linking
pairs can be
created.
KEY
This switch changes the
Side Chain Input
from the main audio path to
the
Key Input
(when fitted).
LFC
This switch incorporates a
Low Frequency Compensation
algorithm to
reduce repeated triggering when processing low frequency signals.
THRESHOLD
This control sets the level at which the compression begins to take effect.
ATTACK
This control sets the time taken for the
Compressor
to reach full
compression.
RELEASE
This control sets the time it takes for the
Compressor
to drop to no
compression after the signal has fallen below the
Threshold
.
RATIO
This control sets the
"slope"
of the compression.
SOFT
This button provides a gradual transition to compression once the
Threshold
is exceeded. Without the
"soft"
option, the output signal is
compressed by the set ratio as soon as the
Threshold
is exceeded.
GAIN
This control compensates for any loss of average signal level within the
compressor.
LIGHTMETERS
Two
Lightmeters
appear on the device.
I/P
displays the incoming signal,
G/R
displays the gain reduction being applied.
146
Supertrue 4 User Guide
1...,138,139,140,141,142,143,144,145,146,147 149,150,151,152,153,154,155,156,157,158,...166
Powered by FlippingBook