Technique Print Samples - page 117

Title Start & End As Limits
The
Title Start & End As Limit
function prevents the external machine from playing,
rewinding or fast-forwarding beyond the boundaries of the timecode values set in the T
itle
Start
and
Title End
fields of the
Title Info
page.
When this option is selected, the external machine will stop when it reaches these points in
any mode.
To Set the Title Start and End as Limits
1. Click the checkbox next to
"Title Start & End as Limits"
.
2. A Green checkmark indicates the option is set.
3. Clicking the checkbox again will clear the option.
Machine Setting
The
Machine Setting Window
enables an offset to be given to each selected external
machine. This offset determines the timecode value difference that must exist between the
external machine and the one designated as the
Master
in your system before the
machines are considered synchronised.
The default value is 00:00:00:00.0 which means the timecode value from the machine must
be exactly the same as the
Master
for synchronisation to be achieved.
This value can be changed by clicking in the
Offset
column of the desired machine and
entering a value from the keyboard for the required difference. This figure should be
positive to advance the machine or negative to retard it.
To Change Machine Offset Timecode Values
1. Click into the hours field of the
Offset
window.
2. Type the new value and press
Enter
.
3. In a similar fashion type the values for the
Minutes
,
Seconds
and
Frames
fields.
4. The new timecode value is set.
115
Supertrue 4 User Guide
1...,107,108,109,110,111,112,113,114,115,116 118,119,120,121,122,123,124,125,126,127,...166
Powered by FlippingBook