Technique Print Samples - page 16

U
ser
G
u
id
e
D/P Mute / Input Cut
Note:
In this mode, the
Lower Row Speaker Legends
apply equally to both rows
.
D/P Mute
In this mode, the upper switch row is dedicated to muting the
Direct/Playback
sources and allows independent muting of incoming
signals. In addition, when changing to a different mode, the
D/P
Mute/Input Cut
switch LED remains
ON
but dimmed to indicate that
D/P Mutes
are still active.
Note: D/P Mute
selections
AND
activations are
preserved when you change to a different
mode. You must return to this mode to change
a
D/P Mute
condition.
Note:
In
7.1
mode, the
Nearfield
switches become
D/P Mutes
for speakers
7&8
.
Input Cut
The lower switches apply an
Input Cut
function within
the logic switching matrix to all incoming monitor
signals, whether derived internally or externally. These
switches may be applied independently.
Note: Input Cut
selections
AND
activations are
preserved when you change to a different
mode. You must return to this mode to change an
Input Cut
condition.
Note:
In
7.1
mode, the
Nearfield
switches become
Input Cuts
for speakers
7&8
and operate as
a pair.
14
SPK
MUTE
INPUT
CUT
PLAY
BACK
SPK
SOLO
FORMAT
D/P
SOLO
D/P
MUTE DIRECT
MODE
SELECT
L
R
LFE/S
C
LS
RS
MONO
LCRS
5.1
STEREO
7.1
FILTER
D/P MUTE
Direct /
Playback
Select
D/P
Mute
Direct
Playback
Monitor Source Select
L
R
LFE/S
C
LS
RS
MONO
LCRS
5.1
STEREO
7.1
FILTER
INPUT
CUT
Input Cut Table
1
2
3
4
5
6
7
8
Format
L
C
R
LFE/S
Ls
Rs
Lc
Rc
ST
OPEN
T
OPEN
T
T
T
X
X
LCRS
OPEN
T
OPEN
X
T
T
X
X
5.1
OPEN
T
OPEN
T
T
T
X
X
7.1
OPEN
T
OPEN
T
T
T
T
T
OPEN
= always active;
X
= always cut;
T
= active by default, operator can toggle the setting;
X
(
T
)
= interactive toggle (specific to LCRS mode). By default speaker 4(LFE/S) is cut, speakers
5(Ls) & 6(Rs) are active. Opening speaker 4(LFE/S) forces 5(Ls) & 6(Rs) to cut and vice-versa.
1...,6,7,8,9,10,11,12,13,14,15 17,18,19,20,21,22,23,24,25,26,...44
Powered by FlippingBook