Technique Print Samples - page 19

specifications
Technical Specifications
Noise
EIN - 200R source, Gain 70dB - 20kHz band RMS
-127dBu
One Line input to Stereo - Gain unity - 20kHz band RMS -86 dBu
THD
Mic input to Main output with 10k or 600R load,
Test signal -30dBu @ 1kHz, Gain 40dB
<0.03%
Line input to Main output with 10k or 600R load,
Test signal +20dBu @ 1kHz, Gain unity
<0.01%
Frequency Response
All Filters & EQ out, output load 10k
Mic input to Main output, Gain 60dB, test signal -40dBu +/- 0.5dBu (20Hz - 20kHz)
Line input to Main output, Unity gain, test signal +20dBu +/- 0.5dBu (20Hz - 20kHz)
Crosstalk
Channel breakthrough
CH1 to Subgroup 1, CH4 to Subgroup 4, Gain unity
Test signal +20dBu to CH1, 200R load to CH4
Measured @ Subgroup 4 output
Better than -90dBu (40Hz - 15kHz)
Channel Pan cut-off
CH1 to Subgroup 4, Pan hard right, Gain unity
Test signal +20dBu to CH1
Measured a Subgroup 3 output
Better than -65dBu (@1kHz)
Maximum Signal Handling
Mic input
+25dBu (with PAD)
Line input
+25dBu
Subgroup & Main Outputs
+25dBu (600R load or higher)
Impedance
Mic input
> 1k2 (20Hz - 20kHz)
Line input
15k (20Hz - 20kHz)
Outputs
75R (@1kHz)
Power Consumption
10-4-2 console
approx. 0.5 kW
32-8-2 console
approx. 1.2 kW
Notes
1.
0dBu = 0.775 volts.
2.
Above specifications apply to standard configuration with 8 mono inputs.
3.
All measurements taken using the Audio Precision System One test set.
4.
Where no load impedance is specified, use 10k or greater.
5.
All figures quoted above are expected typical performance from standard production models.
6.
No literature represents an offer for sale of any particular product.
7.
The company operates a policy of continuous design improvement and reserves the right to
change specifications without notice.
1...,9,10,11,12,13,14,15,16,17,18 20
Powered by FlippingBook