Technique Print Samples - page 12

How to do an Automated Mix
1
Do you want to create fader or switch groups?
See
Appendices A
and
B
.
2
Do you want to know how to use
Virtual Dynamics
?
See
Appendix C
.
3
Do you have timecode on the tape?
If Yes see point 4 below, if No see
Appendix D
.
4
Timecode must be connected from the
Track Output
to
TC IN
on the patchbay or at the
rear of the desk. Click the
EXT T.C
button near the
SMPTE
display if it is not green.
To enable tape machine remote control and the Autolocator, see
Appendix E
.
5
Do you want Moving Faders or VCAs?
Directly below
EXT T.C
the two buttons
LF OFF
and
SF OFF [6]
which switch the
motors off (VCAs on) for large and small faders when green. You can click these at any
time.
6
Click
Filing
, choose
Project
and
Create
, type a name (the name of the artiste
or client) and confirm. Click
Choose Title
or press
Title
then
Save As
, type a
name (for the current track you are mixing) and confirm.
Note that these names appear at the top of the screen and are always visible. Press
List Chan Name
to rename the paths, or use the default names already created
(such as Input 1 etc.) - See
Appendix W
.
7
Select
Automation
and
New Mix
, or simply press
New Mix
at any time.
10
9098i Automation - Getting Started Guide
1...,2,3,4,5,6,7,8,9,10,11 13,14,15,16,17,18,19,20,21,22,...32
Powered by FlippingBook